Industrial Shelving USA Cantilever Rack Shelving
Meco Omaha manufactures five basic capacity series to fit your storage requirements – from Series 1000 Medium Duty through the Series 5000 Extra Heavy Duty. Available in upright heights from 6′ to 20′ with 2′ through 10′ brace widths (measured on center). Arms are completely adjustable on 3″ centers to accommodate an infinite variety of items. Straight arms are available in nine different lengths with or without lips. Heavy Duty and Extra Heavy Duty arms are both available in seven lengths with or without lips. Inclined arms are available in seven lengths with or without lips. A wide range of base sizes allows custom designing of rack systems to your individual needs.
- Series 1000 Medium Duty Cantilever Rack | Installation Instructions 1000 Series
- Series 2000 Meco Medium to Heavy Duty Cantilever Rack | Installation Instructions 2000 Series
- Series 3000 Heavy Duty Cantilever Rack | Installation Instructions 3000 Series
- Series 4000 Standard Heavy Duty Cantilever
- Series 5000 Extra Heavy Duty Cantilever Rack
- Cantilever Rack Accessories
Uprights are punched on both sides for versatility and can be used single sided or double sided depending on the size of base used. Note that arms must never be placed on the back side of a single-based upright. MECO OMAHA CANTILEVER RACKS are modular within each basic capacity series so that additional arms, uprights and cross braces may be ordered at any time to add to your existing system. Different sized arms may be interchanged on racks to further tailor your racks to different uses. Standard and Heavy Duty arms (page 24) are designed for use on Series 3000, Series 4000 and Series 5000 uprights only. Series 1000 and Series 2000 components are not interchangeable with any other rack series.
Single sided uprights can be converted to doubles when used with longer bases designed to accommodate placement of arms on both sides. Upright capacities can be computed by multiplying the number of arms per upright by the individual arm capacities—NOT TO EXCEED TOTAL UPRIGHT CAPACITIES LISTED. Arm capacity is based on EVEN DISTRIBUTION OF LOAD. All racks are designed for quick assembly and come with complete instructions and hardware for installation. Completely adjustable MECO OMAHA CANTILEVER RACKS eliminate storage problems. Heavy duty steel construction permits storage of tubes, bars, structurals and other long heavy items that must be kept off the floor. Bases can be used for extra storage.
Forklift easily loads off and on arms and bases. Fast, convenient handling of heavy, long unwieldy stock. Instant accessibility to one piece or a full load. For longer materials, simply add braces and uprights to fit your requirements. Specially designed MECO OMAHA CANTILEVER RACK systems may be required to meet your needs. MECO OMAHA representatives will work with you to develop the most feasible and economical rack system for your special situation. Special label requirements can be met at a additional cost. Ask us to quote prices and specifications for rack systems not covered in the MECO OMAHA BUYER’S GUIDE
Detail Specifications are set forth on the following pages
Description | Upright Heights | Page No. |
---|---|---|
Series 1000 Medium Duty | 6′, 7′, 8′, 10′, 12′ | 20 |
Series 2000 Medium-Heavy Duty | 8′, 10′, 12′, 14′, 16′, 18′, 20′ | 21 |
Series 3000 Heavy Duty | 8′, 10′, 12′, 14′, 15′, 16′, 18′, 20′ | 22 |
Series 4000 Standard Heavy Duty | 8′, 10′, 12′, 14′, 15′, 16′, 18′, 20′ | 23 |
Series 5000 Extra Heavy Duty | 12′, 14′, 15′, 16′, 18′, 20′ | 24 |
1000 Starter and Add-on Units | 6′, 8′, 10′ | 25 |
4000 Starter and Add-on Units | 8′, 10′, 12′ | 25 |
Standard color for all cantilever rack components is gray. Custom colors available at additional cost.
Series 1000 Medium Duty Cantilever Rack
High quality MECO OMAHA Series 1000 Cantilever Rack is designed for use where heavier capacities are not required. This rack is similar to our popular heavier duty racks except for the use of lighter gauge steel and smaller dimensions of component parts. Available in 6′, 7′, 8′, 10′ and 12′ single and double sided uprights with a choice of eight standard brace lengths (measured on center) to accommodate 12″, 18″, 24″, 30″, 36″, 42″ and 48″ straight or inclined arms. Arms are completely adjustable on 3″ centers up and down the full length of the uprights. Two or more uprights can be assembled into a continuous system. This sturdy and stable rack is as convenient and versatile as the heavier duty racks but priced lower to reflect the reduced capacity. Installation is quick and easy. Racks can be tailored to your individual requirements. Uprights facilitate manual loading and unloading. Open base design affords easy forklift accessibility. Ideal for storing bar stock, pipe, tubing, lumber and many lightweight or hard-to-stock items that must be kept off the floo
Single Sided Uprights
Height of upright | Length of base | PaLength of arm | Weight (Lbs) | Capacity (Lbs) | Model no. |
---|---|---|---|---|---|
6′ | 33″ 33″ 45″ 45″ 57″ |
20 | Series 1000 Medium Duty | 6′, 7′, 8′, 10′, 12′ | 20 |
Cantilever rack is comprised of three components
these components must be ordered in the appropriate quantities and capacities
Sample A: Cantilever Rack Components or an inclined arm?
Please see detail below
Straight Arm
Straight arms up to 48″ long have minimum pitch of 3/8″ per foot to compensate for deflection. 54″ and 60″ arms have a minimum pitch of 5/8″ per foot.
Inclined Arm
Uprights consist of a vertical column and a horizontal base which is bolted to the column. A minimum of two uprights must be ordered to form a storage bay. Each edge of the column is punched vertically on 3″ centers so it may be used as a single or double sided upright depending on the size of base used. NOTE: The arms must never be placed on the back side of a single sided upright and base. Standard upright and base color is gray.
Single Sided Upright
Double Sided Upright
Please provide us with information that will help us price the appropriate equipment you require such as the following:
- It is very helpful to know your budget. What is your budget?
(We have different products to fit your budget) - What is your maximum weight capacity needed per arm position?
- Will you please describe the length and type of material you are storing?
- When do you need this Equipment?
- How many pair of arms do you require?
(Sample A has “4” pair of arms) - How many upright columns do you require for your project?
(Sample A has 2 upright columns) - In the question above, how many units to you want connected together in each run?
(Sample A is 1 complete unit) - How high do you want your cantilever upright column to be?
(Upright heights are available from 6′ to 20′ high – please specify height) - What is the distance between your upright columns?
(Leave blank if you do not know)
Would you like a cantilever straight arm or an inclined arm?
Straight Arm
Straight arms up to 48″ long have minimum pitch of 3/8″ per foot to compensate for deflection. 54″ and 60″ arms have a minimum pitch of 5/8″ per foot.
Inclined Arm
Would you like a cantilever straight arm or an inclined arm? (See above)
What is your requested cantilever straight arm length? | What is your requested cantilever incline arm length? |
Double Sided Upright
Would you like a single sided upright or a double side upright? (See above)
Additional information
When requesting your quote, please specify additional detailed information that will help us create your custom quote. We will contact you for further information.