Cantilever Rack is a freestanding storage unit with horizontal load carrying arms extending outward from a single vertical column. The absence of a vertical support on the outboard ends of the arms permits uninterrupted storage of long lengths of material.
Cantilever Rack is the ideal system for storing furniture, steel bars, pipe and tubing, lumber and other long, heavy items that must be kept off the floor…provides instant accessibility to one piece or a full load. Forklift easily loads off and on arms and bases. Being modular in nature, additional arms, uprights and braces may be added as storage requirements change.
Cantilever Rack is comprised of three components.
- Brace Sets
Industrial Shelving USA Product Information and Specs
Cantilever Uprights: What are they?
Uprights consist of a vertical column and a horizontal base which is bolted to the column. A minimum of two uprights must be ordered to form a storage bay. Each edge of the column is punched vertically on 3″ centers so it may be used as a single or double sided upright depending on the size of base used. NOTE: The arms must never be placed on the back side of a single sided upright and base. Standard upright and base color is gray.
Holes are provided in the base to anchor the upright to the floor. Uprights must never be attached to walls, columns or structures.
Cantilever Arms: What are they?
Cantilever arms are the heart of the rack system. Proper selection can make or break a successful storage plan. MECO OMAHA offers straight arms (generally used for storing stable loads such as lumber, steel sheets, cartons and skids) and inclined arms (for cylindrical objects or loads that tend to roll forward). Arms can be adjusted on 3″ centers up and down the upright and are available in lengths to 60″ in a variety of capacities. The hair pin keeper permits instant adjustability and is easily inserted and removed for adjustment of arm height. Lips are available on all MECO OMAHA arms. Standard arm color is gray.
Straight arms up to 48″ long have a minimum pitch of 3/8″ per foot to compensate for deflection. 54″ and 60″ arms have a minimum pitch of 5/8″ per foot.
Inclined Arms have a pitch of 20? or approximately 4,36″ per foot.
Brace Sets: What are they?
Braces are structural channel members that are bolted between pairs of uprights to provide lateral stability to the rack system. X-bracing is utilized to increase the lateral stability of the taller (15′ to 20′) uprights. Brace lengths are measured from centerline of upright to centerline of the next upright and are sold in sets rather than individual pieces. Standard brace color is gray.
Standard MECO OMAHA Brace Patterns
2B Horizontal Brace Pattern
Used on 6′ to 10′ series 1000 uprights and 8′ series 2000, series 3000 and series 4000 uprights
3B Horizontal Brace Pattern
Used on 12′ series 1000 uprights and 10′ to 14′ series 2000, series 3000 and series 4000 uprights and 12′ to 14′ series 5000
4BX Horizontal Brace Pattern
Used on 16′ to 20′ series 2000 uprights and 15′ to 20′ series 3000, series 4000 and series 5000 uprights and all structural cantilever rack.
4BXX Horizontal Brace Pattern
Used on all 15′ to 20′ uprights when the brace length exceeds 84″ centerline to centerline uprights