EXCELLENT LOW COST STORAGE SYSTEM • IDEAL FOR MAINTENANCE DEPARTMENTSAND TOOL ROOMS
High quality MECO OMAHA Series 1000 Cantilever Rack is designed for use where heavier capacities are not required. This rack is similar to our popular heavier duty racks except for the use of lighter gauge steel and smaller dimensions of component parts. Available in 6′, 7′, 8′, 10′ and 12′ single and double sided uprights with a choice of eight standard brace lengths (measured on center) to accommodate 12″, 18″, 24″, 30″, 36″, 42″ and 48″ straight or inclined arms. Arms are completely adjustable on 3″ centers up and down the full length of the uprights. Two or more uprights can be assembled into a continuous system.
This sturdy and stable rack is as convenient and versatile as the heavier duty racks but priced lower to reflect the reduced capacity. Installation is quick and easy. Racks can be tailored to your individual requirements. Uprights facilitate manual loading and unloading. Open base design affords easy forklift accessibility. Ideal for storing bar stock, pipe, tubing, lumber and many lightweight or hard-to-stock items that must be kept off the floor.
STRAIGHT ARMS have a minimum pitch of 3/8″ per foot to compensate for deflection. Arm capacities are based on an evenly distributed load.
INCLINED ARMS have a pitch of 20 degrees or approximately 4.36″ per foot. Arm capacities are based on an evenly distributed load.
* Length of braces is measured from center of upright to center of upright.’ NOTE: Arm lips are not intended to bear any portion of the load.